Home > Exhibition > Content
Laser cutting system manufacturers at home and abroad to provide a number of special equipment for users to choose:
Feb 10, 2017

(1) collimator, which is a commonly used method, that is, in the CO2 laser output plus a parallel tube for beam processing, beam beam after beam expansion becomes larger, smaller divergence angle, so that the cutting work Range of near-end and far-end pre-focused beam sizes are nearly identical.

(2) The lower axis of a separate moving lens is added to the cutting head, which is independent of the Z axis, which controls the distance from the surface of the material to the surface (stoff). As the table moves or the optical axis moves, the beam travels from the near end to the far-end F-axis so that the spot diameter remains aligned throughout the processing area after the beam is focused.

We're Here to Help

  • +86-577-65962690
    +86-577-65962690
    zjfxjx@vip.163.com
    Zhouqian Village, Taoshan Town, Ruian City, Zhejiang, China

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!